1. Remove the sealing strip

2. Five front knurled screws [T20]

3. The front wheel hub turns. In order to facilitate the removal of snap screws, it is inside.

4. Protect headlights

5. Remove the deflector screw [No. 8 screw]

6. Remove the fixing screws of the front bar [Two No. 10 screws]

7. Remove the entire front bar

8. Remove the ACC plug connector

9. Remove the radar plug interface

10. Then the whole front bar can be removed

11. Remove the anti-collision cotton

12. Remove the two front bar brackets

13. Remove the air inlet grille air guide

14. Remove the plug interface of China Grid radar

15. Remove the medium network snap

16. After all the buckles are removed, the original China open can be removed